TinyVGA Workshop

The TinyVGA project by Arjan Scherpenisse was an attempt to decipher the way VGA is used to generate images on computer monitors. The result is the TinyVGA board, which is easy to make and can be plugged in to almost any VGA monitor or projector to generate a 32x20 pixel image with just a handful of components, a 2cm x 3cm pcb and a 9 volts battery.

Cost

A small additional cost will be involved for the parts and the PCB: for EUR 15,- you will be able to build and take home your own signal generator. Tools and parts will be provided, so all you will have to bring are the 15 euros, your hands and a small part of your brain.

Signup

To be able to bring the right amount of parts and tools, please indicate your interest in this workshop by putting down your name below:

• Your name
• ...