Personal tools

Sc12 ipc@chip

From Eth0Wiki

Revision as of 01:40, 16 January 2012 by KingOfDos (talk | contribs) (→‎Pinout)
Jump to: navigation, search

This is a page about the boards SA007 brought to eth0:winter 2k12.

Specs

OUI 00:30:56 'Beck IPC GmbH' (report if other!)

Chip.ini

[IP]
NETMASK=255.255.255.0
ADDRESS=10.10.1.61
DHCP=1
[TELNET]
USER0=tel
PASSWORD0=IPC-03
[FTP]
USER0=ftp
PASSWORD0=IPC-03
[STDIO]
STDIN=TELNET
STDOUT=TELNET

Pinout / Board desc

Top view

IPCboard-top.png

  1. (J5) +5v
  2. (J5) GND
  3. (J5) NC (not connected)
  4. (J5) NC
  5. (J5) NC
  6. (J5) NC
  7. (J5) Input optocoupler U1
  8. (J5) Input optocoupler U2
  9. (J4) NC
  10. (J4) NC
  11. (J4) NC
  12. (J4) NC
  13. (J4) NC
  14. (J4) NC
  15. (J4) NC
  16. (J4) NC
  17. (J6) Output optocoupler U2
  18. (J7) Output optocoupler U2
  19. (J2) rs422 green -> max488 pin 5 (Y)
  20. (J2) rs422 white/green -> max488 pin 6 (Z)
  21. (J2) rs422 orange -> max488 pin 7 (B)
  22. (J2) rs422 white/orange -> max488 pin 8 (A)
  23. (J6/J7) Output potocoupler U1
  24. (J6/J7) Output optocoupler U1

Bottom view

  • Pin 17 @ BECK SC12 'RESET / NMI / LINK LED.' -> Connected to red led at board, near the text 'art.' at the right bottom.

For pinout @ BECK, see Datasheet, page 5.

Links

Hackerspace working on/with them