Sc12 ipc@chip
From Eth0Wiki
This is a page about the boards SA007 brought to eth0:winter 2k12.
Contents
Specs
- Beck IPC@Chip SC12
- AMD 80186 @ 20Mhz
- 512kb ram
- 512kb flash
- 10mbit ethernet
- rs232+rs422 (via max488)
- File:SCHEMA.pdf
- File:Startup.pdf
- File:Controller datasheet.pdf
OUI vs Serial#
- OUI 00:30:56 'Beck IPC GmbH'
- MacAddr format: 00:30:56:fx:xx:xx, the xxx is (24 bit) serial number, written as 5 characters (hex).
Example:
A:\>ver ...cut... Target=SC12 Serialnumber=xxxxx ...cut... A:\>
Interrupt 0xA0 service 0x00: Get serial number. http://isa.umh.es/temas/micros/doc/sc12/doc/biosints.htm#0xA00x00 Interrupt 0xA0 service 0x17: Get MAC address of the Ethernet interface http://isa.umh.es/temas/micros/doc/sc12/doc/biosints.htm#Interrupt_0xA0_function_0x17__Get_MAC_address_of_the_Ethernet_interface
Memory map says: 0400h - 04FFh for MAC Address. Possible to change MAC addr (plz check later)? I guess that 'on boot, the default mac == serial'. And that we could configure it via program at boot?
Chip.ini
[IP] NETMASK=255.255.255.0 ADDRESS=10.10.1.61 DHCP=1 [TELNET] USER0=tel PASSWORD0=IPC-03 [FTP] USER0=ftp PASSWORD0=IPC-03 [STDIO] STDIN=TELNET STDOUT=TELNET
More? See http://isa.umh.es/temas/micros/doc/sc12/doc/config.htm
Pinout / Board desc
Top view
- (J5) +5v
- (J5) GND
- (J5) NC (not connected)
- (J5) NC
- (J5) NC
- (J5) NC
- (J5) Input optocoupler U1
- (J5) Input optocoupler U2
- (J4) NC
- (J4) NC
- (J4) NC
- (J4) NC
- (J4) NC
- (J4) NC
- (J4) NC
- (J4) NC
- (J7) Output optocoupler U2
- (J7) Output optocoupler U2
- (J2) rs422 green -> max488 pin 5 (Y)
- (J2) rs422 white/green -> max488 pin 6 (Z)
- (J2) rs422 orange -> max488 pin 7 (B)
- (J2) rs422 white/orange -> max488 pin 8 (A)
- (J6) Output optocoupler U1
- (J6) Output optocoupler U1
Bottom view
Note:
- Pin17 @ SC12 = Link Led (connected to red led)
Links
- http://isa.umh.es/temas/micros/doc/sc12/SC12V110_ReleaseNotes.pdf
- http://www.beck-ipc.com/files/api/scxxx/program.htm
- http://wunderkis.de/scbrd/index.html
- http://isa.umh.es/temas/micros/soft/sc12/
- http://isa.umh.es/temas/micros/doc/sc12/
- http://xforce.iss.net/xforce/xfdb/8922 <- IPC@CHIP Web server root directory is set to the system root, aka, access all the files!
- http://www.openwatcom.org/index.php/Main_Page <- compiler for 16bit dos apps, that runs on linux
- http://www.weerschip.nl/download_beck.html <- weather station, with software examples (1 zip checked with 'grep -i beck *')
- http://www.lourensrozema.nl/ax/index.php?page=home.inc <- mp3 player + ide disk, incl some .zip files (schematics, sources incl remote syslog)
- http://www.psh-mikro.sk/beck/Beck_mod_de.htm <- CompactFlash something (schematic + demo program)
- ftp://212.71.131.133/pub/beck/software/
